Publicidad
Idiomas disponibles
Idiomas disponibles
This feature allows you to enjoy the benefits of Dolby
Pro Logic by using the speakers of the projection TV as
the center speaker. To utilize this system, you must
connect an amplifier that is Dolby Pro Logic
compatible. Connect the speaker wires from the
amplifier's center channel output terminals to the
projection TV's CENTER SPEAKER IN. Both right and
left terminals must be connected to receive an audio
signal. After making the right connections, select
"SPEAKER: CENTER" in the AUDIO menu (page 25).
The left and right audio channels can be heard through
your audio system speakers.
In this COnnection, adjust the volume with your
amplifier.
Notes
* Always match the speaker cord and terminal colors when
making the connections.
* Unplug the projection TV when making the connections. If the
exposed speaker cord wires touch while the projection TV is
plugged in, the projection TV may short-circuit and be
damaged.
* Do not pull on the speaker cords.
* Always turn off the amplifier power before connecting to the
CENTER SPEAKER IN terminals.
(Rear of projection TV)
Dolby* Pro Logic-compatible
amplifier
Speaker
cords
* Manufactured under license from Dolby Laboratories
Licensing Corporation. Additionally licensed under one or
more of the following patents: U.S. numbers 3,959,590.
Canadian numbers 1,004,603 and 1,037,877. "Dolby", "Pro
Logic", and the double-D symbol OO are trademarks of Dolby
Laboratories Licensing Corporation.
This feature allows you to control your projection TV
and other Sony equipment with one remote
commander.
* To control other Sony equipment with the projection
TV's remote commander, connect the input of the
equipment to CONTROL S OUT jack on the
projection TV.
* To control the projection TV with the remote
commander of other Sony equipment, connect the
output of the equipment to CONTROL S IN jack on
the projection TV.
.
(Rear of projection TV)
CONTROL S
IN|
OUT
Getting Started
| 47-EN
Publicidad
