(3) Press + # or - $ to set the time (hour then
minute) that you want to start blocking the
channel and press RETURN.
sd Core diate melon ar:
channel (cHANNEL BLOCK)
@ CHANNEL BLOCK
1. EVERY SATURDAY
GHO
RETURN
9, 10:30%H --h CH
Cy¥)
eo
se
MENU
Set
the
duration.
Use
¢
Exit
This feature allows you to prevent children from
(4) Press + # or — $ to select the hour duration you
watching unsuitable programs.
want to block and press RETURN.
Make sure the clock is set correctly. If it is not, set the
Each time you press RETURN, the hour
clock first (page 27).
duration increases by one hour up toa
maximum of 12 hours.
—_
@ CHANNEL
BLOCK
1. EVERY SATURDAY _
+t/-4
GAO
RETURN
9 10:30 12h CH
MENU
MODE
RETURN
G¥IO
Low position ——>
Select
the channel.
Use
¢
Exit
MA
(5) Press + # or — $ to select the channel and press
1 Press MENU.
RETURN.
@ CHANNEL
BLOCK
CHOW)
3 Press + # or - ¥ to select CHANNEL BLOCK
and press RETURN.
¢ UM
Exit
@ CHANNEL
BLOCK
If you select the blocked channel during the time
you set, the message "BLOCKED" appears and the
picture is blocked and the sound is muted.
Select_a_progra
Use? RUM
Exit
To cancel a CHANNEL BLOCK setting
Press RESET on the remote commander.
4 Enter a CHANNEL BLOCK setting.
(1) Press + # or - $ to select program 1 or 2 and
Note
press RETURN
* If the CHANNEL BLOCK and ON/OFF TIMER settings are
:
overlapped, the later time setting has priority over the other
setting.
(2) Press + # or — $ to set the days and press
RETURN. Each time you press + # or- $, the
days cycle as shown below.
EVERY SUN-SAT—*+EVERY MON-FRI
SUNDAY—*MONDAY-— ...—*SATURDAY—
EVERY SUNDAY—*+EVERY MONDAY->
.. EVERY SATURDAY
.
GAO
met
@ CHANNEL
BLOCK
1. EVERY
SATURDAY
12:00AM --h
CH
HOW)
Set
the
time.
Use
> BAN
Exit Se
Operations
| 29-EN