Sony KP-46V25 Manual De Instrucciones página 15

5 To erase and/or add other channels, repeat
step 4.
6 When you finish, press MENU.
y p
Notes
* If you erase or add a VHF or UHF channel, the cable TV
channel with the same number is also erased or added, and
vice versa.
* If more than 90 seconds elapse after you press a button, the
menu disappears automatically.
* Erasing and adding channels are also available for the AUX
input.
—
LN ee ee
Adjusting convergence
(CONVERGENCE)
The projection tube image appears on the screen in
three layers (red, green and blue). If they do not
converge, the color is poor and the picture blurs. To
correct this, adjust convergence.
You do not have to do this procedure if you execute
AUTO SET UP (page 13). Do this procedure only
when you want to adjust it manually.
1 Press MENU.
2 Press + t or - § to move the cursor (>) to
SET UP and press RETURN.
3 Press + ¢ or - $ to move the cursor (>) to
CONVERGENCE and press RETURN. .
The CONVERGENCE adjustment screen appears.
Ea CONVERGENCE
4 press + # or - ¥ to move the cursor (>) to
the symbol showing the line you want to
adjust, and press RETURN.
FRCONVERGENCE
me MENU
Use ¢ PETMAN
Exit MAY
| RED: Red vertical line (left/right adjustment)
— RED: Red horizontal line (up/down adjustment)
| BLUE: Blue vertical line (left/right adjustment)
— BLUE: Blue horizontal line (up/down adjustment)
5 press + t or - ¥ to move the line until it
converges with the center green line, and
press RETURN.
E= CONVERGENCE
To move up/right, press + %.
To move down/left, press — ¥.
6 Repeat steps 4 and 5 to adjust the other
lines until all three lines converge and are
seen as a white cross.
7 Press MENU to return to the Original screen.
ESS a ET)
Setting cable TV on or off
If you have connected the projection TV to a cable TV
system, set CABLE to ON, the factory setting. If not, set
CABLE to OFF.
You do not have to do this procedure if you execute
AUTO SET UP (page 13). Do this procedure only
when you want to set it manually.
1 Press MENU.
2 Press + # or - } to move the cursor (>) to
SET UP and press RETURN.
3 Press + # or - § to move the cursor (>) to
CABLE and press RETURN.
SS|SET UP
CHANNEL ERASE / ADD
CH_ CAPT 1ON/ GUIDE
VIDEO LABEL
CABLE: ON
AUTO PROGRAM
CONVERGER ENGL | SH
CONVERGENCE
MENU
Use > FETAY Exit
4 Press + ¢ or - } to select ON or OFF and
press RETURN.
GSSET UP
CHANNEL ERASE / ADD
CH_CAPT | ON/GU1I DE
VIDEO LABEL
»>CABLE: OFF
AUTO PROGRAM
LANGUAGE : ENGL 1 SH
CONVERGENCE
MENU
Use > PERU Exit MU
5 Press MENU to return to the original screen.
Note
¢ If CABLE appears in black, the projection TV is set to a video
input and you cannot select CABLE. Press TV on the remote
commander so that a channel number appears.
Getting Started | 45-EN