cecotec BOLERO COOLMARKET SBS 592 INOX Manual De Instrucciones página 59

1. PARTS AND COMPONENTS
Fig. 1
1. Freezer compartment
2. Door
3. Freezer-compartment drawers
4. Refrigerator compartment
5. Door
6. Refrigerator-compartment drawers
7. Water dispenser (only for model 02516)
Note
The graphics in this manual are schematic representations and may not exactly match the
product.
To make the most out of the refrigerator in terms of energy, place all the shelves and drawers
in their original position, that is, as shown in Figure 1.
2. BEFORE USE
- This refrigerator includes a packaging designed to protect it during transport. Take the
refrigerator out of the box and remove all packaging materials. You can keep the original
box and other elements in a safe place, this will help you prevent product damage when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or not in good condition, immediately contact the official Cecotec Technical
Support Service.
3. INSTALLATION
The location you choose for the refrigerator must be properly ventilated and away from heat
sources. Take into account the space dimensions shown in figure 2. Do not place the refrigerator
near heat sources, like a hob, and avoid direct sunlight to ensure the cooling effect and save on
energy consumption. It is not recommended to place the refrigerator in a wet place, as it may
rust and cause electrical leakage.
Fig. 2
Bolero CoolMarket SBS 592 Inox / Bolero CoolMarket SBS 592 WD Dark E
ENGLISH
59