SIGMA SPORT BC 700 Manual Del Usuario página 19

• 8 . B E S E T T I N G A V S (average speed), T R P (distance). S T P (stopwatch)
and M A X (maximum spoed)
Hold down button (A) for at least 3 seconds (fig. 18).
TRP, AVS, STP and MAX are reset to zero.
• 9. SETTING THE TIME
Select CLK (timo) using button (B)).
Hold down tho grey button (on the back of the cycle computer (C)) for at least 3 seconds with
an object such as a ball point pen (fig. 13). The time is displayed with the hour figures and CLK
flashing.
Press button (A) to advance the flashing figure by one digit at a time until you reach the required
hour (fig. 19).
Press button (B) to store the hour figuro. The first digit of the minutes figure will start to flash.
Use button (A) to advance and button (B) to set. Repeat for the second minutes digit.
Once the correct time is set, press the grey button on the back of the computer (C) once
(tig. 13). The time is stored and can be changed at any time.
• 10. CHANGING THE BATTERIES (Figs 20 22)
Batteries: 2 x 1 , 5 volt, SR 44 (G 13) type, 11.6 x 5.4 mm
The BC 700's low power consumption means that the batteries only need to be
changed approximately every 2 years (depending on usage), but should be
changed as soon as the display becomes faint.