Publicidad
Idiomas disponibles
Idiomas disponibles
Failure to follow the safety precautions may result in the risk of serious injury.
•
Don't exceed the maximum supported weitht of 160 kg
•
Check all components are secured before use
•
Make sure that the product is in good working order.
•
Visually check the product
•
Do NOT tilt or lever the product during use. The whole footplate should remain in contact with the floor at all times.
•
Only use the product on a flat surface.
•
The carer / attendant must always apply counter- pressure when the user is standing up, sitting down or transferring.
•
The carer must always support and counterbalance the device when used by a user. If the patient uses the device to
move to or from a wheelchair, the wheelchair brakes should always be applied and the legrests removed or swung
out.
•
Ensure both the carer and patient wear suitable footwear..
•
Do not leave a patient unattended on the device.
•
In case of damaged, broken, worn or missing parts, contact the dealer.
MOUNTING
1. Carefully remove all of the parts from the packaging
2. Put the base on a level surface, activate the locking brake to
prevent the base from moving during assembly.
4. Position the lower frame and the lower frame into the
baseplate mount.
Version Juin 2023
3. Place each lower frame tube into the lower frame mounts,
making sure that the numbered side of the tube is facing
outwards..
10
Publicidad
