Publicidad
Idiomas disponibles
Idiomas disponibles
CARE AND MAINTENANCE
Failure to care for and maintain your product may result in the risk of serious injury.
•
Clean the product regularly with lukewarm water, a soft cloth and a neutral detergent.
•
Do not use cleaning products containing phenol or chlorine, as this could damage aluminium and polyamide materials.
•
Dry with a clean, dry soft cloth.
•
Make sure there is no accumulation of dirt or debris around the axle, brakes or wheels.
•
Periodically check all screws and bolts for wear and strength. Replace all broken, damaged or worn parts immediately.
•
Before each use, make sure to check the cylinder.
•
In the event of a malfunction, do not repair the table yourself. Consult an authorised dealer.
CHANGE OF OWNERSHIP
The product can be reused. It must first be cleaned and disinfected in accordance with hygiene instructions. When transferring
the product, remember to hand over all the necessary technical documents to the new user. Beforehand, the product must be
inspected by an authorised specialist.
RECYCLING
When the product has become unusable and you have to throw it away: please contact your specialist dealer. If you wish to
carry out recycling for yourself, ask your local waste management company for disposal guidelines.
STORAGE
Failure to comply the storage conditions may lead to deterioration of the product and thus to the risk of serious
injury.
Do not store your product for an extended period of time near a heat source or in the sun (e.g. behind a window or near a
radiator) or near a cold source.
Keep away from all flames and sources of sparks.
Respect the conditions for storing and storing your product.
•
In a dry and temperate place
•
Protect your product by packaging it from dust, corrosion (e.g. abrasive elements, sand, sea water, salty air).
•
Store all removed parts together in the same place (or locate them if necessary) to avoid mixing them with other
products when reassembling.
•
All components must be stored without any load (do not place too heavy objects on the product components, do not
jam anything...).
Version Juin 2023
HEIGHT ADJUSTMENT
Simply pull the table top upwards to adjust the table height.
To lower the table, pull the adjustment lever, adjust to the correct height and then
release the lever.
9
Publicidad
