en
Operation
■ Move the swivel arm until it engages in
the required position.
Position
Drive
1
7
2
7
3
6
9
4
7
* Insert / remove whisk, stirrer or kneading
hook.
Operation
W Risk of injury!
Do not insert mains plug until all prepa
rations for working with the appliance are
complete.
Attention!
Do not operate the appliance without an
accessory/tool in the operating position. Do
not operate the appliance empty. Do not
expose appliance or accessories to heat
sources. Parts are not microwavesafe.
26
Tool /
Operating
Accessory
speed
17
15
13
*
–
37
35
57
57
■ Before operating the appliance
and accessories for the first time,
clean thoroughly; see "Cleaning and
servicing".
Preparation
■ Place the base unit on a smooth, clean
surface.
■ Pull out the power cord
(Fig. C). Pull out cable to the
required length.
Warning!
Do not twist the cord when inserting it.
■ Insert the mains plug.
Bowl and tools
Observe the application examples in
table L
W Risk of injury from the rotating tools
While the appliance is operating, never
place fingers in the mixing bowl. Attach the
cover (12) before operating the appliance!
Do not change tools until the drive has
come to a standstill – when the appliance
is switched off, the drive continues running
briefly and stops in the tool change position.
Do not move the swivel arm until the tool
has come to a standstill.
Always secure unused drives with protective
drive covers.
Attention!
Use bowl with this appliance only.
Professional flexi stirring
whisk (13)
for stiring mixtures, e.g. cake
mixture, fruit cake, ... and folding in
ingredients such as raisins and chocolate
chips
Professional beating whisk (14)
for whisking egg whites and cream
(min. 30 % fat content) and for
mixing sponge mixture
Kneading hook (15)
for kneading dough e.g. yeast
dough, bread dough, pizza dough,
pasta dough, pastry and folding in ingre
dients such as seeds into the dough