Silk’n LED FACE MASK 100 Manual De Usuario página 15

NOTICE! RISK OF DAMAGE!
EN
• Do not use any aggressive cleaners (e.g.
vinegar or limescale removers), brushes
with metal or nylon bristles, or sharp or
metallic cleaning utensils such as knives, hard
scrapers and the like.
• Do not use hot water for cleaning.
Use a damp cloth or a water-based wipe to wipe off the face
mask . Then wipe it dry with a dry cloth.
1
10 Storage
All parts must be completely dry before being stored.
• Store the product in a clean and dry place, avoiding heat and
direct sunlight.
• Store the product so that it is not accessible to children.
• For best protection, store the product in its original packaging.
11 Troubleshooting
Some problems may be caused by minor faults that you can fix
yourself. To do so, follow the instructions in the following table.
If it is still not possible to resolve the problem, contact customer
service. Do not repair the product yourself.
Fault
The product
does not
operate.
The product
does not charge.
15
Possible cause and solution
• Make sure the product is properly
charged.
• Make sure the product is not connected
to a USB power source. The product does
not work while charging.
• Make sure the USB cable is securely
connected between the charging port and
the USB power source.