Descargar Imprimir esta página

Breville the Fast Slow Pro BPR700BSSUSC Manual De Instrucciones página 25

Publicidad

Idiomas disponibles

Idiomas disponibles

Care & Cleaning
Before cleaning, ensure the cooker is turned off,
unplugged, cooled to room temperature and all
pressure has been released.
Do not use harsh abrasives, caustic cleaners
or oven cleaners when cleaning the cooker.
Cleaning with a dry cloth or abrasive cleaners
may scratch the surface.
Cleaning the bowl and outer body
1. The removable cooking bowl can be washed
in the dishwasher. However, to maintain the
ceramic coating, it is recommended to wash
the cooking bowl in warm soapy water.
Rinse with clean water and dry thoroughly.
2. Wipe the moat and outer body with a soft,
damp sponge. Apply the cleanser to the
sponge, not the cooker surface, before
cleaning.
3. Remove the condensation drip cup by
gently pulling the bottom away from the
body. Wash in warm soapy water, rinse with
clean water, dry thoroughly and click back
into position.
4. Wipe the LCD screen with a soft
damp cloth.
5. Let all surfaces dry thoroughly prior to
inserting the power plug into a power outlet
and turning the cooker on.
WARNING
To avoid electric shock, do not immerse the
cord, plug or cooker in water (or other liquids).
Cleaning the lid
1. Open the lid. Unscrew and remove the
sealing nut from the center of the lid and
pull the lid away from the lid arm.
2. Gently pull the silicone gasket out from
around the wire ring on the underside of
the lid.
3. Wash the sealing nut and pressure release
valve in warm soapy water. Rinse with clean
water and dry thoroughly.
4. Wash the silicone gasket and the lid on the
top rack of the dishwasher. Alternatively,
wash in warm soapy water, rinse with clean
water and dry thoroughly.
5. After cleaning the lid, regularly inspect and
ensure the following:
a) Safety locking pin moves up and down
freely. Always remove any oil or food
residue left on this area.
b) Pressure release valve and cover are clean
and free of food or liquid. To clean, twist
and pull the pressure release valve cover
off the lid, wipe with a soapy cloth, rinse
and dry thoroughly. Clip cover back into
its original position.
EN
25

Publicidad

loading