Descargar Imprimir esta página

Bruder Mannesmann Werkzeuge 12555-STS350 Instrucciones De Manejo página 54

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 58
Technical dates
Voltage
Rated Power
Idle speed
Disc diameter
Spindle thread
Sound pressure level (LPA)
(uncertainty K = 3 dB)
Sound power level (LWA)
(uncertainty K = 3 dB)
Vibration
(uncertainty K = 1,5 m/s²
Protection class
Noise and vibration information
Measured values determined according EN 60745
-
The vibration emission level given in this information sheet has been measured in
accordance with a standardized test given in EN 60745 and may be used to compare one
tool with another.
-
The given vibration emission level may be used for the initial estimation of the real exposure.
-
The vibration emission level will vary because of the ways in which a power tool can be used
and may increase above the level given in this information sheet.
Try to keep the exposure as low as possible. To reduce the vibration emission level the user
-
should wear working-gloves and use the machine for limited time.
All parts of working cycles have to be considered (including the time the power tool is
-
switched off, and the time, when the power tool is running under no-load condition).
The strength of the tightening flange corresponds to the specifications of standard EN 10025 for
steel FE 430 B, or a material with a similar strength.
The tensile strength of the protective hood is 270-450 N/mm, and the minimum breaking
elongation is 28% (length of test bar: 50 mm).
Handling, transport and storage of grinding wheels:
Grinding wheels are fragile as well as sensitive to impact and shock. Therefore particular
measures are necessary:
-
Do not drop wheels and avoid sudden impacts.
-
Do not use any wheels that have been dropped or damaged.
-
Avoid vibrations or shocks during use.
-
Avoid damages to the mounting hole.
-
Avoid stresses on the grinding surface.
-
Store the grinding wheels flat or vertically, dry, free of frost and at a constant medium
temperature.
230 V / 50Hz
500 W
-1
11000 min
115 mm
M14
84 dB(A)
95 dB(A)
3,37 m/sec²
/ II
Be sure to wear safety goggles, dust mask and
ear-protection during use!
GB - 15

Publicidad

loading