Publicidad
Idiomas disponibles
Idiomas disponibles
STARTING/CANCELING
A FUNCTION
After setting a function, you must press START/
ENTER to start the function. If you do not
press START/ENTER within 5 seconds of
setting, "START?" will show on the
display as a reminder. If you do not press
START/ENTER within 5 minutes of setting, the time
OFF/CANCEL will cancel any function except the
Clock, Timer, or Oven Lockout. When you
press OFF/CANCEL, the display will show
the time of day or, if the minute timer is also
being used, the time remaining.
of day will appear. You must reset the function and
press START/ENTER.
ULTRABAKE rMBAKING/ROASTING
Your oven _sdesigned with the LJLTRABAKE
enhanced baking system to constantly monitor
oven temperature. The bake and broil elements
will cycle, as needec
to maintain the desired
temperature. This feature is automatically
activated
when the oven is _noperation.
1. Place the rack(s) where you need them in the
oven. For more information, see the "Positioning
racks and pans" section, p. 12.
2.
Press BAKE.
3.
Set the temperature
(optional).
Do this step if you want to set a temperature
other than 350°E Press TEMP (A) or (Y) pad(s)
to raise or lower the temperature
in 5°F amounts.
Use these pads until the desired temperature
shows on the small display.
IMPORTANT: Never place food or cookware
directly on the oven door or the oven bottom.
PRESS
YOU SEE
PRESS
YOU SEE
11EMP
(example for bake at 375°F)
18
Publicidad
