Publicidad
Idiomas disponibles
Idiomas disponibles
SETTING THE CONTROLS (contd.)
6, After the oven is cool, wipe off any residue or ash
with a damp cloth or sponge.
If needed, touch up spots
with a mild abrasive cleanser
or cleaning sponge.
NOTE: Make sure the clock is set to the correct
time of day. (See "Setting the clock" in the "Using
Your Range" section, p. 15.)
1, Press CLEAN.
This will automatically
set a 3_-hour Self-
Cleaning cycle.
PRESS
YOU SEE
2, Set the cleaning time (optional).
If you want a Self-Cleaning
cycle longer or
shorter than 31/2hours, use the HOUR and MIN
pads to set the cleaning time you want. Press
the (A) or (V) pad(s) until a time between 2_-4_
hours shows on the display.
PRESS
HOUR
MIN
YOU SEE
3, Press DELAY START.
PRESS
(example shows 4½-hour
cleaning time)
YOU SEE
4,
Set the start time.
Press the HOUR/MIN (A) or (V) pad(s) until the
correct time of day to start the Self-Cleaning
cycle shows on the display.
PRESS
HOUR
MIN
YOU SEE
(example for 12:30 start time)
5, Press START/ENTER.
PRESS
YOU SEE
continued on next page
31
Publicidad
