Neoss NeoScan 2000 Manual De Instalación Y Funcionamiento página 12

Installing the wall mount charging holder
To mount the Charging Holder on the wall, follow these steps:
• Select an area that you can access easily.
• Insert the screws through the holes in the holder bracket to affix it to a solid surface.
Insert one end of the charging cable into the bottom of the charger.
Insert the Charging Holder into the holder bracket.
Insert the scanner into the Charging Holder.
CAUTION: If the Charging Holder is not properly installed, there is a risk that the Charging Holder can
fall off the wall, resulting in damage to the scanner.
1 2 NeoScan™ 2000 Installation and operation manual // Setting up the NeoScan 2000