Publicidad
Idiomas disponibles
Idiomas disponibles
• Close the battery cover by turning it to lock.
• The Charging Holder holds a spare Battery and keeps the battery level at approximately 80%. Open
the battery cover by turning it to unlock and you will be able to take the battery out.
NOTE: Please fully charge the battery before use.
Charging holder overview
Place the scanner in the Charging Holder when you are not using it.
NOTE: The scanner will automatically shut down if it is idle for more than 3 minutes. If you need to use it
again, press any button on the scanner, or take it out of the Charging Holder.
8
NeoScan™ 2000 Installation and operation manual // NeoScan 2000 overview
Publicidad
