Maintenance of refrigerator
OVERALL CLEANING
› Dust behind the refrigerator and on the
floor must be cleaned to improve the co-
oling effect and energy saving.
› Check the door gasket regularly to make
sure there is no debris. Clean the door gas-
ket with a soft cloth dampened with soapy
water or diluted detergent.
› The interior of the refrigerator should be
cleaned regularly to avoid odors.
› Please turn off the power before cleaning
the interior, remove all foods, drinks ,shel-
ves, drawers, etc.
› Use a soft cloth or sponge to clean the
inside of the refrigerator, with two ta-
blespoons of baking soda and a quart of
warm water. Then rinse with water and
wipe clean. After cleaning, open the door
and let it dry naturally before turning on
the power.
› For areas that are difficult to clean inside
the refrigerator (such as narrow places,
gaps or corners), we recommend to wipe
them regularly with a soft rag, soft brush,
etc. and when necessary, with some tools
(such as thin sticks) to ensure no contami-
nants or bacterial accumulation in these
areas.
› Do not use soap, detergent, scrub pow-
der, spray cleaner, etc., as these may cause
odors inside the refrigerator or contami-
nat food.
MDRS619FIE46 (BCD460 wifi说明书).indd 21
› Clean the door tray, shelves and drawers
with a soft cloth dampened with soapy
water or diluted detergent. Dry with a soft
cloth or dry naturally.
› Wipe the outer surface of the refrigerator
with a soft cloth dampened with soapy
water, detergent, etc., and then wipe dry.
› Do not use hard brushes, scouring pads,
wire brushes, abrasives
(such as toothpaste), organic solvents
(such as alcohol, acetone, banana oil, etc.),
boiling water, acid or alkaline items, which
may damage the fridge surface and in-
terior. Boiling water and organic solvents
such as benzene may deform or damage
plastic parts..
› Do not rinse directly with water or other
liquids during cleaning to avoid short
circuit or affect electrical insulation after
immersion.
Defrosting
› The refrigerator is made based on the
air-cooling principle and thus has automa-
tic defrosting function. Frost formed due
to change of season or temperature may
also be manually removed by disconnec-
tion of the appliance from power supply
or by wiping with a dry towel.
EN
21
2022-1-11 10:57:23