ENGLISH
Decalcification
Over time, the machine accumulates limescale deposits, so it is necessary to descale the
machine every 2 months.
1. Pour water and descaler into the water tank up to the MAX capacity according to the
proportion established by the descaler manufacturer.
2. Place the filter holder without ground coffee inside the group.
3. Consume half of the tank by making double coffees.
4. Consume the other half of the tank by using hot water.
Repeat the step from point 1 but only using purified water to remove the descaler residues.
Repeat this process as many times as necessary to remove all the residues.
5. Troubleshooting
Problem
No water is
coming out
No steam is
generated
The coffee comes
out of the edge of
the filter holder.
54
Cause/Result
Water tank is out of water.
Remains of mineral deposits in the
internal passages.
You have not removed the silicone
plug from the water tank inlet.
Machine malfunctions.
Steam nozzle clogged.
Water tank is empty.
Machine malfunctions.
There is too much coffee in the filter. Turn off the machine and wait
There is ground coffee in the sealing
ring of the filter holder.
Machine malfunctions.
Solution
Pour water into the water tank.
Perform the descaling process.
Remove the silicone plug from
the water tank inlet.
Contact the Technical Support
Service of Cecotec.
Clean the steam nozzle and
perform the descaling process.
Pour water into the water tank.
Contact the Technical Support
Service of Cecotec.
for it to cool down. Clean the
filter and then pour in the
ground coffee in appropriate
quantities.
Contact the Technical Support
Service of Cecotec.