cecotec Power Espresso 20 Barista Compact Manual De Instrucciones página 9

- The surface of the heating element is subject to residual
heat after use.
- Switch off and unplug the appliance before changing
accessories or nearby parts that move during use.
- Ensure that the mains voltage matches the voltage
specified on the device rating label and that the plug is
earthed.
- Do not immerse the cable, plug, or any other
non-removable part of the device in water or any other
liquid or expose electrical connections to water.
- Make sure your hands are dry before handling the plug or
switching on the device.
- Warning: If the appliance falls accidentally in water, unplug
it immediately. Do not touch the water!
- Check the power cable regularly for visible damage.
- If the cable is damaged, it must be repaired by the official
Cecotec Technical Support Service to avoid any type of
danger.
- Warning: do not use the appliance if its cord, plug, or
housing are damaged, nor after it malfunctions or has been
dropped or damaged in any way.
- Do not twist, bend, pull, or damage the power cable.
- Protect it from sharp edges and heat sources.
- Do not allow the cable to touch hot surfaces.
- Do not let the cable hang over the edge of the working
surface or worktop.
- This appliance is not intended to be operated by means of
an external timer or separate remote-control system.
- Turn off and unplug the appliance from the mains supply
when not in use and before cleaning it.
- Pull from the plug, not the cable, to disconnect it from the
outlet.
Power Expresso 20 Barista Compact
9