Troubleshooting - Oase OptiMax 85i Instrucciones De Uso

REPAIR
A damaged unit cannot be repaired and
must be put out of operation. Dispose of
the unit in accordance with the regulations.

TROUBLESHOOTING

Issue Cause
The unit does not No mains voltage
start up
Impeller unit blocked
Water flow Position of the flow regulator
insufficient
Filter housing or impeller unit soiled, hose blocked
Hose defective
Hose kinked
Impeller unit worn
Only submersed Filter housing clogged
during installation
DISPOSAL
Do not dispose of this unit with domestic
waste! For disposal purposes, please use
the return system provided. Render the
unit unusable beforehand by cutting the
cables.
Solution
Check the mains voltage.
Clean
Readjust the flow regulator.
Clean
Replace
Route hose in a straight line
Replace impeller unit
Clean the filter housing.
- EN -
11