Sears Kenmore 385.19110 Manual De Instrucciones página 63

Adjusting the buttonhole width and density
(1) Adjusting the buttonhole width
Press the mode selection key ______ to enter the stitch
width adjusting mode.
Press the Down(-) key to decrease buttonhole width.
Press the Up (+) key to increase buttonhole width.
The buttonhole width can be varied from 2.5 to 7.0.
_ Narrow buttonhole (2.5 mm wide)
_ Wide buttonhole (7.0 mm wide)
O)
Double layer buttonhole
To make a solid and sturdy buttonhole, sew another
layer of buttonhole over the previous one.
After the buttonhole is finished, simply depress the
foot control again.
[i] Do not raise the foot or reselect the pattern.
The machine will sew another buttonhole in the
following order and stop automatically:
[2] Straight stitching in reverse to go back to the
starting point.
[3] Front bartack and left row
[4] Right row
[5] Back bartack and locking stitches at the end