Functional Description - Milwaukee 2705-20 Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modified. Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
• Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the risk
of fire.
SERVICE
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
DRILLS AND IMPACT DRILLS
• Wear ear protectors when impact drilling. Expo-
sure to noise can cause hearing loss.
• Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
• Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting ac-
cessory contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give
the operator an electric shock.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
Some dust created by power sand-
WARNING
ing, sawing, grinding, drilling, and
other construction activities contains chemicals
known to cause cancer, birth defects or other repro-
ductive harm. Some examples of these chemicals
are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are spe-
cially designed to filter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
No-Load Revolutions per Minute (RPM)
Blows per Minute Under Load (BPM)
UL Listing Mark para
Canadá y Estados Unidos
C
US
SPECIFICATIONS
Volts .............................................................. 18 DC
Battery Type .................................................M18™
Charger Type ................................................M18™
Recommended Ambient
Operating Temperature ......................0°F to 125°F
Cat. No. ..................................................... 2705-20
No Load RPM ............. Low 0 - 550 / High 0 - 2 000
Steel ................................................................. 1/2"
Flat Bit in Wood ............................................. 1-1/2"
Auger Bit in Wood .......................................... 1-1/2"
Hole Saw in Wood ............................................... 3"
Screws in Wood ............................................ Ø 3/8"
Cat. No. ..................................................... 2706-20
No Load RPM ............. Low 0 - 550 / High 0 - 2 000
BPM ................................................High 0 - 32,000
Steel ................................................................. 1/2"
Flat Bit in Wood ............................................. 1-1/2"
Auger Bit in Wood .......................................... 1-1/2"
Hole Saw in Wood ............................................... 3"
Screws in Wood ............................................ Ø 3/8"
Masonry ............................................................ 5/8"

FUNCTIONAL DESCRIPTION

7
6
5
4
3
2
1
1. Mode selector
2. Bit holder
3. Trigger
4. LED
5. Keyless chuck
6. Torque selector collar
7. Application selector collar
8. Speed selector
3
8
10
11
12
9. Side handle
10. Control switch
11. Handle
12. Belt hook
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

2706-20

Tabla de contenido