Hupfer CoolMultiMobil Manual De Instrucciones página 59

Operating instructions
4 Transport
WARNING
Risk of crushing
Improper use or incorrect means of transport may cause the unit to
tip over, slip or fall. If not adequately secured, there is a danger of
serious crushing injury and damage to the unit.
−
Secure each unit with appropriate transport securing devices
during transport.
−
Fix the wheels in the "straight ahead" position.
NOTICE
Damage to the locks
The forces that occur during transport by lorry cause damage to
engaged locks.
−
Secure the unit with a transport securing device.
−
Release the locks during transport by lorry.
4.1 Delivery
Delivery is performed by a transport company, whose specialists are
responsible for securing the load during transport. At the place of
delivery, the transport cart can then be moved on its own wheels.
4.2 In-house transport
A lift must always be used for transport to another floor. The unit is not
designed to be pushed up or down slopes such as wheelchair ramps.
Note the instructions in chapter ⮫ Chapter 7.2 'Moving the unit'
on page 18⮫ 'Moving with the push handle' on page 21.
Only use transport vehicles that are approved for the weight of the unit.
1. Close the roller shutters.
2. Release the locks.
3. Fix the wheels in the "straight ahead" position.
4.3 Lifting
The transport cart does not have any attachment points for eyelets or
similar lifting aids.
Always transport the transport cart upright if possible. It can be lifted
using a lifting platform, for example.
CoolMultiMobil
14 / 39