Operating instructions
Fault description
Insufficient air flow
10 Disposal
Cause
Fans not connected
Ensure that the air baffles and compo-
nents from the interior are fully and cor-
rectly installed
Evaporator iced up
Air flow disrupted, e.g. due to protruding
trays
Fan(s) defective
9.4
Repairs and spare parts
Spare parts and accessories are available from our customer service.
Replace defective components with genuine spare parts. Only then
can safe and reliable operation be guaranteed. When ordering spare
parts or requesting customer service, always state the order number
and the information on the rating plate. This information helps avoid
follow-up queries and speeds up the process.
9.5
Recommissioning
The unit may only be used in a technically sound condition, for its
intended use, and in accordance with the operating instructions. Check
the unit for visible damage before each use. In the event of damage,
inform the responsible departments immediately. Only operate units
that are in faultless technical order.
■
Check the functions of the unit, especially the lock and cooling.
■
Clean the unit thoroughly before putting it back into operation.
■
If the unit has been stopped, leave it to rest for 24 hours before
putting it back into operation.
Help protect our environment. Make sure that the
materials are recycled.
−
Have the unit disassembled and disposed of by
recycling companies. All the materials are recy-
clable.
−
The cooling system may only be removed by
refrigeration specialists.
−
The electrical system may only be removed by
qualified electricians.
CoolMultiMobil
Remedy
Clean the condensate pan and
connect the fan
Internal air baffles/components
missing or incorrectly installed
De-ice the evaporator
Insert the tray all the way or
remove it completely; clean the
condensate pan; check the air
duct.
Contact the service technician,
replace the fan if necessary
38 / 39