Hupfer CoolMultiMobil Manual De Instrucciones página 80

Operating instructions
9 Maintenance and repair
Dust can collect in front of the heat exchanger during operation. Heat
exchangers heavily contaminated with dust work inefficiently and con-
sume more energy.
The heat exchanger can be cleaned.
1. Disconnect the CoolMultiMobil from the power supply.
2. Open the inspection opening, component 12.
3. Clean the heat exchanger, e.g. with a vacuum cleaner. Be careful
with the plates of the heat exchanger. Bent plates make the heat
exchanger ineffective. The metal plates present a cutting hazard.
4. Close the inspection opening.
�� The heat exchanger has been cleaned.
8.6 Disinfecting
All the surfaces can be disinfected with commercially available surface
disinfectants.
NOTICE
Damage to property
High concentrations of disinfectant can cause corrosion damage.
−
Follow the instructions of the disinfectant manufacturer.
DANGER
Electrical hazard
Electricity is a serious hazard and can cause injury or even death.
−
Before starting any cleaning and maintenance work, disconnect
the unit from the mains.
−
Disconnect the mains plug and put away the cable in its desig-
nated place until the next use.
−
Do not clean the unit with steam cleaners or high-pressure
cleaners.
CoolMultiMobil
35 / 39