Publicidad
Idiomas disponibles
Idiomas disponibles
Important safeguards
To prevent personal injury and to protect the device from
damage, read and follow these safety precautions.
General safety precautions
Warning! If not avoided, the following could result in
death or serious injury.
•
TRIP OR FIRE HAZARD! Position all cables where they
cannot contact hot surfaces, be pulled, be tripped over,
or damaged by persons walking on or objects rolling over
the cables.
•
This product must be installed within a restricted access
location not accessible by the general public.
•
Only personnel who are trained on the precautions for
the restricted access location can be granted entry to the
area.
•
Install the product so users and the audience cannot
enter the restricted area at eye level.
•
ELECTRICAL and BURN HAZARD! Use caution when
accessing internal components.
•
High leakage current. Earth or ground connection
essential before connecting power.
•
FIRE AND SHOCK HAZARD! Use only the attachments,
accessories, tools, and replacement parts specified by
Christie.
•
FIRE HAZARD! Do not use a power cord, harness, or
cable that appears damaged.
•
HAZARDOUS SUBSTANCE! Use caution when handling
the product as it contains ethylene glycol. Do not ingest
coolant. For information on safe handling, refer to the
Safety Data Sheet (SDS) for the coolant.
•
Lift equipment must be used to position the product.
•
Do not install or operate the projector in any position
that does not meet the stated product specifications for
alignment and orientation.
Caution! If not avoided, the following could result in
minor or moderate injury.
•
Only Christie qualified technicians are permitted to open
product enclosures.
Laser safety precautions
Warning! If not avoided, the following could result in
death or serious injury.
•
Do not operate the cinema projector without all of its
covers in place.
•
LASER RADIATION HAZARD! This projector has a built-in
Class 4 laser module. Never attempt to disassemble or
modify the laser module.
CP4445-RGB and CP4455-RGB Product Safety Guide
020-103745-01 Rev. 1 (12-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
•
RADIATION HAZARD! Use of controls or adjustments, or
performing procedures other than those specified may
result in hazardous radiation exposure.
•
Do not look directly into the lens when the light source is
on. The extremely high brightness can cause permanent
eye damage.
•
Possible hazardous optical radiation emitted from this
product. (Risk group 3)
AC/power precautions
Warning! If not avoided, the following could result in
death or serious injury.
•
SHOCK HAZARD! Only use the AC power cord provided
with the product or recommended by Christie.
•
FIRE AND SHOCK HAZARD! Do not attempt operation
unless the power cord, power socket, and power plug
meet the appropriate local rating standards.
•
SHOCK HAZARD! Do not attempt operation if the AC
supply is not within the specified voltage and current, as
specified on the license label.
•
SHOCK HAZARD! The optional UPS power cord must be
inserted into an outlet with grounding.
•
SHOCK HAZARD! A dedicated, protected ground or earth
wire must be installed on the product by Christie
qualified technicians or electricians before it can be
connected to power.
•
SHOCK HAZARD! Disconnect the product from AC before
installing, moving, servicing, cleaning, removing
components, or opening any enclosure.
•
Install the product near an easily accessible AC
receptacle.
•
Always connect the ground or earth first to reduce shock
hazard.
•
A certified electrician must be present during installation
to make sure the installation meets the local electrical
code.
Caution! If not avoided, the following could result in
minor or moderate injury.
•
Use an appropriately sized strain relief connector with the
knockout plate provided, to make sure adequate
environmental sealing and to prevent the AC supply
cable from accidentally being torn out or rubbing against
the knockout plate.
•
FIRE HAZARD! Do not use a power cord, harness, or
cable that appears damaged.
•
FIRE OR SHOCK HAZARD! Do not overload power outlets
and extension cords.
•
SHOCK HAZARD! Power supply uses double pole/neutral
fusing.
Important Safety Information
4
Publicidad
