Briggs & Stratton Speed Clean Manual Del Usuario página 28

Pressure Washer
=.$$Ute
Product Specifications
Outlet Pressure ................. 2,800 PSi (193 BARS)
Flow Rate .................... 2.5 GPM (9.5 liters/rain)
Water Supply Temperature ........... IO0°F (38°0) MAX
Displacement ................... 11.58 cu. in. (190 cc)
Spark Plug Gap ................... 0.020 in. (0.50 ram)
FuelCapacity ...................... 1.6 Qt. (t .5 Liters)
Oil Capacity .................... 20 Ounces (0.6 Liters)
CommonService Parts
PumpSaver .................................. 6039
O-Ring Maintenance Kit .................... 196002GS
Water nlet Screen ......................... B2384GS
Air Cleaner ................................ 797301
Spark Plug .......................... 692051 or 5066
Engine Oil Bottle ................... 100005 or 100028
FuelStabilizer ..................... 100120 or 100117
Spark Arrester .............................. 690813
Pewer Ratings: The gross power rating for individual gas engine models is labeled in accordancewith SAE (Societyof
Automotive Engineers)code J1940 (Small Engine Power & Torque Rating Procedure),and rating performance has been obtained
and corrected in accordancewith SAEJ1995 (Revision 2002°05). Torquevalues are derived at 3060 RPM; horsepower values are
derived at 3600 RPM. The gross power curves can be viewed at www.BRIGGSandSTRATTON.COM. Net power values are taken
with exhaustand air cleaner installed whereas gross power values are collected without these attachments.Actual gross engine
power will be higher than net engine power and is affected by, among other things, ambient operatingconditions and engine-to-
engine variability. Giventhe wide array of products on which engines are placed,the gas engine may not developthe rated gross
power when used in a given piece of power equipment, This difference is due to a variety of factors including, but not limited to,
the variety of engine components (air cleaner, exhaust, charging, cooling, carburetor,fuel pump, etc.), application limitations,
ambient operatingconditions (temperature, humidity, altitude), and engine-to-enginevariability. Dueto manufacturing and
capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.
* This pressure washer is rated in accordanceto the Pressure Washer Manufacturers Association (PWMA) standard PW101°
2010 (Testing and Rating Performance of Pressure Washers).
Briggs & StrattenPower ProductsGroup, LLC
P.O. Box 702
IViiiwaukee,Wisconsin, 53201-0702 U.S.A.
28 (800} 743-4115 BRI66SandSTRATTON.COIVl