Descargar Imprimir esta página

Briggs & Stratton Speed Clean Manual Del Usuario página 6

Ocultar thumbs Ver también para Speed Clean:

Publicidad

Idiomas disponibles

Idiomas disponibles

A
WARNING
The high pressure stream of water that
this equipment produces could cut through skin
and its
underlying tissues, resulting
in serious
injury and possible amputation.
Spray gun traps high water pressure, even when engine is
stopped
and water is
disconnected,
which could result in
serious
injury'.
, if cut by fluid, call physician immediately. DO NOTtreat as a
simple cut.
, DO NOT allow CHILDRENto operate pressure washer.
, NEVERrepair high pressure hose. Replaceit.
° NEVERrepair leaking connections with sealant of any kind.
Replaceo-ring or seal.
, NEVERconnect high pressure hose to nozzle extension.
, Keep high pressure hose connected to pump and spray gun
while system is pressurized.
, ALWAYS point spray gun in safe direction, press red button
and squeezespray gun trigger to releasehigh pressure, every
time you stop engine.
, NEVERaim spray gun at people,animals, or plants.
, DO NOTsecure spray gun in open position.
, DO NOTleave spray gun unattended while machine is running.
, NEVERuse a spray gun which does not have a trigger lock or
trigger guard in place and in working order.
, Always be certain spray gun, nozzles and accessoriesare
correctly attached.
A WARNING Unintentional sparking could cause fire or
electric shock resulting in death or
serious injury'.
WRENADJUSTINGOR MAKING REPAIRSTO YOUR PRESSURE
WASHER
, Disconnect the spark plug wire from the spark plug and phce
the wire where it cannot contact spark plug.
WHENTESTINGFOR ENGINESPARK
o Use approved spark plug tester.
, DO NOT check for spark with spark plug removed.
A WARNING Starter and other rotating parts could
entangle hands, hair, clothing, or accessories
resulting in serious injury'.
, NEVERoperate pressure washer without protective housing or
covers.
, DO NOTwear loose clotNng, jewelry or anything that couN be
caught in the starter or other rotating parts.
, Tie up long hair and remove jewelry.
A WARNING Risk of eye or bodily injury.
Spray could splash back or propel
objects resulting in serious injury.
, Nways wear indirect vented (chembaI spbsh) safety goggles
marked to comply with ANSI Z87.1 when using or in vicinity of
this equipment.
, NEVERsubstitute safety glasses or dry-condition goggles for
indirect vented safety goggles.
, Always wear protective clothing such as a long-sleeved shirt,
long pants and close4oed shoes.
, NEVERoperate pressure washer when barefoot or wearing
sandals or shorts.
A CAUTION
Excessively high operating speeds could
result in minor injury.
Excessively low speeds impose a heavy load.
, DO NOTtamper with governor spring, links or other parts to
increase engine speed. Pressure washer supplies correct rated
pressure and flow when running at governed speed.
, DO NOTmodify pressure washer in any way.
NOTICE High pressure spray could damage fragile items
including glass.
o DONOT pointspraygun at glasswhenusingred(0°) spraytip.
o NEVER aimspraygun at plants.
NOTICE
improper treatment of pressure washer could
damage
it and shorten its life.
, if you havequestions about intended use, ask dealeror contact
qualified service center.
, NEVERoperate units with broken or missing parts, or without
protective housing or covers.
, DO NOTby-pass any safety device on this machine.
, DO NOTtamper with governed speed.
o DO NOT operate pressure washer above rated pressure.
, DO NOT modify pressure washer in any way.
, Before starting pressure washer in cold weather, check all parts of
the equipment to be sure ice has not formed there.
, NEVERmove machine by pulling on hoses. Use handle provided
on unit.
, This equipment is designed to be usedwith Briggs & Stratton
Power Products authorized parts ONLY. if equipment is used with
parts that DO NOT comply with minimum specifications, user
assumes all risks and liabilities.
6
BRIGGSandSTRATTON.CONI

Publicidad

loading