Publicidad
Idiomas disponibles
Idiomas disponibles
4.4 Anomalies & solutions
4.4.1 Cure your appliance
If a fault occurs, before calling the after-sales service, please ensure that is not
because of incorrect operations and refer to the fault table, attempt to correct
the fault yourself. You can often easily rectify technical faults on the appliance
yourself.
The appliance
does not work
Knobs have
fallen out of
the support in
the control
panel
Knobs can no
longer be turned
easily
Fan does not
work all the
time in the
mode: «Fan
Heating»
Faulty fuse
Power cut
Knobs have been
accidentally
disengaged
There is dirt
under knobs
-
Check the circuit breaker in the
fuse box
Check whether the kitchen light or
other kitchen appliances are working
Knobs can be removed. Simply place
knobs back in their support in the
control panel and push them in so that
they engage and can be turned as
usual.
Knobs can be removed. To disengage.
knobs, simply remove them from the
support. Alternatively, press on the
outer edge of knobs so that they tip
and can be picked up easily. Carefully
clean the knobs using a cloth and
soapy water. Dry with a soft cloth.
Do not use any sharp or abrasive
materials. Do not soak or clean in the
dishwasher. Do not remove knobs
too often so that the support remains
stable.
This is a normal operation due to thea
best possible heat distribution and best
possible performance of the oven.
Publicidad
