Publicidad
Idiomas disponibles
Idiomas disponibles
Remove the oven door
1. Open the front door (1)
2. Open the clips at the hinge housing (2) on the right and left sides of the front door by
pressing them down as shown in the figure.
3. Place the oven door in the half open position
4. Remove the oven door by pulling it upwards until it releases from the left and right hinges.
The oven surface may be damaged by some debris or cleaning materials. Do not
use abrasive detergents, cleaning powders or creams or any sharp objects. Do
not use strong abrasives or sharp metal scrapers to clean the oven door glass
as they can scratch the surface, which could result in serious damage to the
glass.
To reinstall the door, follow the steps described above in reverse order.
Make sure you correctly close the right and left clips on the hinge compartment.
Remove the inner glass from the door
•
Press the glass in the direction of the arrow as shown in the following image, gently pull it
towards you, lightly pushing it on the other side. Wash and dry the glass and put it back
on the oven door in reverse order.
REPLACING THE OVEN LAMP
DANGER:
Before replacing the oven lamp, make sure that the product is disconnected from
mains and cooled down in order to avoid the risk of an electrical shock. Hot
surfaces may cause burns!
The oven lamp is a special electric light bulb that can resist up to 300 °C. See
"Technical Specifications" for details. Oven lamps can be obtained from
Authorized Service Agents.
Position of lamp might vary from the figure.
For replacing the lamp, follow the next steps:
50
1- Front Door
2- Hinge
3- Oven
Publicidad
