Lenco DAR-017 Manual Del Usuario página 14

Using the radio- FM MODE
Turn the radio on, press the Mode button repeatedly and select the FM mode. The display will show
'FM' and the current station name or frequency if RDS is not available.
Manual search
To search manually, first short press the 'STATIONS' button, you will see 'start tune' displayed, and
'Tune' keep showing on right side of the display, then turn the ok knob right to scan upwards or turn
the ok knob left to scan downwards, when you finished manual search, short press 'STATIONS'
button, 'Tune' disappeared.
Auto search
To initiate auto search, press and hold the ok knob. The radio starts to scan the frequency band. It
will stop automatically when a station has been found.
If you want the radio to auto search downwards or upwards then you have to do a manual search
downwards or upwards prior to long pressing the ok button.
FM mode- Scan settings
Press the menu button and rotate the ok knob to select 'Scan setting'. Short press the ok knob and
choose between 'Strong stations only' or 'All stations' by turning the ok knob. Press the ok knob to
confirm your choice. If choose 'Strong station only', the radio will only scan and play stations with a
strong signal. If selecting 'All stations', the radio will also scan and play stations with a weak signal.
FM mode- Audio setting
Press the menu button and rotate the ok knob. Choose 'Forced mono' 'Yes' or 'No' and short press
the ok knob to confirm. If your favorite radio stations signal is weak, then choose 'Forced mono 'Yes''
to get better sound quality.
FM mode-System settings (see DAB mode 'system settings)
FM Display Modes
This function allows information relating to the current station to be shown in the display, short
press the ok knob repeatedly to scroll through the following information screens
14