Kärcher K2 Entry Manual De Usuario página 9

Assembly
See the Quick Start Guide to aid in as-
sembly of the device.
1. Unplug the locking slide for the high-
pressure hose from the trigger gun.
b.
2. Connect the high-pressure hose to
the trigger gun.
b.
3. Push the locking slide into the trig-
ger gun until fixed into place.
4. Ensure that the high-pressure hose
is securely connected to the trigger
gun by pulling the high-pressure
hose.
5. Connect the high-pressure hose to
the high-pressure outlet located on
the device.
a.
a.
a.
6. Place the device on the even sur-
face.
7. Connect the male garden hose
quick connector to the water inlet on
the device and tighten it.
Initial start-up
Note
To protect from the impurities in the
water, the KÄRCHER water filter
(optional accessory, order
no. 4.730-059.0) is recommended.
Observe the regulations of the water
supplier.
English
b. b. b.
b. b. b.
a.
9