Step 31
å
Insert one SLIDE CAM (10A) into the SMALL LEFT DRAWER SIDE (D594).
å
Fasten one DRAWER LEFT (40CD) to the SMALL LEFT DRAWER SIDE (D594). Use two
GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #4.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
Roller end
10A
Screw head - turn the CAM to line
up the holes in the SLIDE with the
holes in the DRAWER SIDE.
www.sauder.com/service
(2 screws per slide)
3S
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
1
2
3
4
D594
411201
Drawer Slide
Center the screw in the oval hole.
Page 37