Publicidad
Step 32
å
Carefully flip the DRAWER over.
å
Insert one SLIDE CAM (10A) into the SMALL RIGHT DRAWER SIDE (D593).
å
Fasten one DRAWER RIGHT (40CC) to the SMALL RIGHT DRAWER SIDE (D593). Use
two GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #4.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
Drawer Slide
Center the screw in the oval hole.
Page 38
(2 screws per slide)
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
2
3
4
D593
411201
3S
Roller end
1
Screw head - turn the CAM to line
up the holes in the SLIDE with the
holes in the DRAWER SIDE.
www.sauder.com/service
10A
Publicidad
