Selecting The Dimmer Mode; Selecting The External Component To Use - JVC KS-FX470 Manual De Instrucciones

Receptor-reproductor de cassette
Ocultar thumbs Ver también para KS-FX470:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Selecting the dimmer mode

When you turn on the car head lights, the display automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer mode is activated.
• AUTO:
Activates Auto Dimmer.
• ON:
Always dims the display.
• OFF:
Cancels Auto Dimmer.
1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select "DIMMER" with ¢
3. Select the desired mode with the control dial.
The dimmer mode changes as follows:
Note on Auto Dimmer:
Auto Dimmer equipped with this unit may not work correctly on some vehicles, particularly on those
having a control dial for dimming.
In this case, set the dimmer mode to "ON" or "OFF".

Selecting the external component to use

You can connect the external component to the CD changer jack on the rear using the Line
Input Adaptor KS-U57 (not supplied).
To use the external component as the playback source through this unit, you need to select
which component — CD changer or external component — to use. When shipped from the
factory, CD changer is selected as the external component.
• LINE IN:
• CHANGER:
1. Change the source to FM, AM or tape with FM/AM or TAPE 2 3 .
2. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
3. Select "EXT IN" with ¢
4. Select the desired mode with the control dial.
The external component selecting mode changes as follows:
Note:
For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/
Connection Manual (separate volume).
22
or 4
AUTO
OFF
To use the external component other than CD changer.
To use the CD changer.
or 4
LINE IN
CHANGER
.
ON
.

Publicidad

Tabla de contenido
loading

Tabla de contenido