Bosch UniversalDistance 30 Manual Original página 28

28 | English
The reception lens (12) and the laser beam output (13)
must not be covered during the measuring process.
Selecting the Reference Level
For the measurement, you can select from various reference
levels:
The rear edge of the measuring tool (e.g. when plac-
ing against walls)
The front edge of the measuring tool (e.g. when
measuring from a table edge)
For more information, you can access the online op-
erating instructions at www.bosch-pt.com/manuals
Measuring functions
Selecting/Changing Measuring Function
The measuring tool offers the following measuring functions:
– Length measurement
– Area measurement
– Continuous measurement
– Volume measurement
1 609 92A 8CZ | (31.03.2023)
Press the button as many times
as needed for the indicator for the
required function to appear in the
display (5).
To confirm the selection, press
the button.
Bosch Power Tools