Descargar Imprimir esta página

Hach DPD1P1.99 Manual Básico Del Usuario página 3

Ocultar thumbs Ver también para DPD1P1.99:

Publicidad

Table of Contents
1 Additional information
2 Specifications
on page 3
3 General information
on page 4
4 Installation
on page 6
Section 1 Additional information
An expanded user manual is available on the manufacturer's website.
Section 2 Specifications
Specifications are subject to change without notice.
The product has only the approvals listed and the registrations, certificates and declarations officially
provided with the product. The usage of this product in an application for which it is not permitted is
not approved by the manufacturer.
Specification
Dimensions (length/diameter) pHD: 271 mm (10.7 in.)/35 mm (1.4 in.); 1-in. NPT; LCP (liquid crystal polymer):
Weight
Pollution degree
Overvoltage category
Protection class
Altitude
Operating temperature
Storage temperature
Wetted materials
Measuring range
Sensor cable
Components
Resolution
Maximum flow rate
Pressure limit
Transmission distance
1
Most pH applications are in the 2.5 to 12.5 pH range. The pHD Differential pH sensor with the
wide-range glass process electrode operates very well in this range. Some industrial
applications require accurate measurement and control below 2 or above 12 pH. In these
special cases, please contact the manufacturer for further details.
on page 3
Details
187 mm (7.35 in.)/51 mm (2 in.); 1-½ in. NPT
316 g (11 oz)
2
I
III
2000 m (6562 ft) maximum
5 to 105 °C (23 to 221 °F)
4 to 70 °C (40 to 158 °F), 0 to 95% relative humidity, non-condensing
PEEK or PPS Polyphenylensulfid (PVDF) body, glass process electrode, titanium
ground electrode and FKM/FPM O-ring seals
Note: The pH sensor with optional HF-resistant glass process electrode has 316 stainless steel
ground electrode and perfluoroelastomer wetted O-rings.
pH sensor: -2 to 14 pH
ORP sensor: -1500 to +1500 mV
pHD: 5-conductor (plus 2 shields), 6 m (20 ft); LCP: 5-conductor (plus 1 shield),
3 m (10 ft)
Corrosion-resistant materials, fully-submersible
pH sensor: ±0.01 pH
ORP sensor: ±0.5 mV
3 m/s (10 ft/s) maximum
6.9 bar at 105 °C (100 psi at 221 °F)
100 m (328 ft) maximum
1000 m (3280 ft) maximum with a termination box
5 Operation
on page 8
6 Maintenance
on page 15
7 Troubleshooting
on page 19
1
(or 2.00 to 14.00)
English 3

Publicidad

loading

Este manual también es adecuado para:

Dpd2p1.99Drd1r5.99Lxv427.99.10001