Publicidad
Idiomas disponibles
Idiomas disponibles
Mounting the
speakers onto furniture
Fix the rubber surface (GF) to the
speakers that are to be mounted.
Remove the protective film and
press the adhesive side of the
rubber surface down hard onto
the bottom of the speaker.
N.B: ensure that the recess in
the rubber surface is aligned
with the connection port on the
speaker, so that this is still
accessible.
Now attach a cable (K2, 6m) to
the speaker and lead this out-
ward through the recess on the
side. The speaker can now be pla-
ced anywhere in the room, like on a piece of fur-
niture for example. The rubber surface on the
bottom of the speaker will prevent scratching of
delicate surfaces.
Connecting
Once you have mounted and positioned all spea-
kers and have set up the Acoustimass
®
module,
you must now connect all of the individual com-
ponents together and connect the module to your
Loewe TV set.
The following must be carried out:
• each of the five (Concertos 1) or four (Concer-
tos 2) satellite speakers must be connected to
the module with a cable (K1 or K2) (connec-
tions on the bottom),
®
• the Acoustimass
module must be connected
to the TV and/or an external device or DVD
player with the audio connection lead (VA)
(connection ports on the bottom of the module
and on the back of the TV set) and
• the mains cable (NK) should be connected to
the power supply.
Please refer to the wiring diagram for information
on how to connect the individual components
together. The individual cables are explained and
shown on the page regarding contents of deli-
very. When laying the cables, please ensure that
none are kinked.
N.B.: before you begin laying the cables, please
ensure that the
Front-Lautsprecher links
Acoustimass
®
Left front speaker
module is still not
connected to the
power supply. Only
connect it to the
power supply when
all other cables have
been connected.
Also, make sure that
the TV set is also
K2*
switched off when
6m
connecting the com-
ponents.
Please ensure when
connecting the
DVD /
cable (VA) to the TV
video recorder
(digital)
set that the square
bridge connector
has been removed
from the "subwoo-
fer stand" sokket.
You can remove it
VA*
by pressing on the
lokking catch.
(Concertos 2)
Please keep the con-
nector; you will
need it if you later
want to use your TV
set for sound play-
back.
Insert the red cinch
Surround-Lautsprecher links
Left surround speaker
connector of the
cable (VA) into the
Connection port
on the bottom of the
red audio OUT sok-
®
Acoustimass module
ket on the back of
the TV set and the
other connector into
the white audio
* For description and diagram of cables, please see the contents of delivery
OUT socket.
The system is ready to use once all cables have
been connected and the module is connected to
the power supply. It does not need to (nor can it)
be switched on or off. This happens automatically
when you switch the TV set on and off.
Front-Lautsprecher rechts
Right front speaker
TV set
DIG IN
SAT
RC5/RC6
1
IR
SERVICE
2
CTRL
SAT A/D
VGA
DIG OUT
AUDIO IN
AV1
AV2/RGB
AV3
R
AUDIO
OUT
VHF/UHF
L
SUR
C
R
SUBWOOFER
L
STAND
SUB
Connection port
on the back
K2*
of the TV set
6m
DIG IN
1
RC5/RC6
SAT
SERVICE
IR
2
CTRL
Centre speaker
SAT A/D
VGA
DIG OUT
AUDIO IN
AV3
AV1
AV2/RGB
R
AUDIO
OUT
VHF/UHF
L
SUR
R
C
SUBWOOFER
STAND
L
SUB
K2* (only with
Concertos 1)
Front Speaker Output
Right Center
Left
Right
Left
Wireless
Audio
Surround Speaker Output
Input
for later radio
transmission
K1*
K1*
15m
Surround-Lautsprecher rechts
Right surround speaker
15m
(only with
Concertos 1)
NK*
15
Publicidad
