Chauvin Arnoux C.A 6531 Manual De Instrucciones página 36

5.2 Resistance measurement
Start up the instrument by setting the switch to 40 kΩ
(C.A 6531) or 400 kΩ (C.A 6533).
Connect the + and - leads to the measurement points.
Note the resistance value displayed (see § 3.2).
Note: The user can control the backlighting as required by
pressing the key.
A programmed alarm threshold may be activated with the
ALARM key (see § 4.5).
5.3 Capacitance measurement (C.A 6531)
Start up the instrument by setting the switch to 4000 nF.
Connect the + and - leads to the measurement points.
Note the capacitance value displayed (see § 3.3) and the
length of the line after programming its capacitance per unit
length.
Note: The user can control the backlighting as required by
pressing the key.
5.4 AC / DC current measurement (C.A 6531)
Start up the instrument by setting the switch to 400 mA.
Connect the leads from the mA and - terminals to the
measurement points. The fuse is checked at start-up and
after every measurement.
Note the current value displayed (see § 3.4).
Note: The user can control the backlighting as required by
pressing the key.
5.5 AC voltage measurement (C.A 6531)
Start up the instrument by setting the switch to V~.
Connect the + and - leads to the measurement points.
Note the voltage value displayed (see § 3.5).
Note: The user can control the backlighting as required by
pressing the key .
36