essentiel b ELF1014-4b Instrucciones De Uso página 35

- SYNTHETICS(press the button once)
This program is used for garments made of synthetic materials. On wet fabrics (e.g.
after washing), garments are allowed to rest after spinning; and is designed to achieve
the ideal moisture content for easier ironing of dry fabrics.
- DELICATES (press the button twice)
This cycle uses steam to refresh and soften the creases in garments. The program
consists of an initial steam phase and a second phase in which excess moisture is
removed (for immediate use). This cycle is suitable for dry fabrics.
These options must be selected before pressing the START/PAUSE button
"Special Programs" button
This button allows you to choose between three different options (available only for
some programs):
- SMALL LOAD
This option (which can be configured in more than one program) optimizes the water
and energy consumption, while maintaining the washing performance.
The SMALL LOAD option is designed for reduced loads and lightly soiled clothing, to
limit unnecessary waste.
- OVERNIGHT WASHING
This option reduces the intermediate spin speed by 400 rpm and if possible, increases
the water level during rinsing, to keep the laundry immersed, and thus loosen the fibres.
Any remaining water will remain in the drum while the machine is in pause mode.
Press the START/PAUSE button
spin time can be reduced or eliminated).
The water drainage is controlled electronically and is silent, which makes this option
suitable for using at night.
- CLEANING THE DRUM
An option to clean the washing machine drum.
Use only powdered laundry detergent.
Do not start the program with laundry inside the washing machine.
It is recommended to do this every 50 washing cycles.
This option can only be selected for the DRAINING & SPINNING programs.
68
.
to finish with a spin cycle and draining step (the
These options must be selected before pressing the START/PAUSE button
If an option is not compatible with the selected program, the option LED will flash and
then turn off.
Child lock
You can lock the machine controls by pressing the temperature and spin speed selection
buttons simultaneously for 3 seconds. This avoids the current program changing if you
accidentally press a button.
The controls can be unlocked easily by simultaneously pressing the temperature and
spin speed buttons again or by turning off the machine.
The digital display
The digital display continuously displays the status of the machine.
5 6
1
3
2
1) DOOR LOCK INDICATOR
The icon indicates that the door is locked.
When the START/PAUSE button is pressed
temporarily and then stays on.
The DOOR LOCK indicator must turn off before you can open the door.
2) CONTROL LOCK INDICATOR
This LED means that the controls are locked.
3) LOAD DETECTION INDICATOR (only works with some programs)
During the first few minutes of a cycle, the LOAD DETECTION indicator remains on
while the smart sensor weighs the laundry and adjusts the cycle time, water quantity
and electricity consumption.
LOAD DETECTION allows you to check the load in the drum in the first minutes of the
.
7
8 9
4
and the door is closed, it flashes
69