Serta Motion Essentials II Manual Del Usuario página 24

Menu
Table of Contents
STEP 6
Tighten both legs (snug, but not fully tight) (FIGURE 3).
FIGURE 3
STEP 7
Repeat procedure at foot end of base.
STEP 8
Loosen all (4) outside legs approximately 1/4". Install a slotted spacer on
each leg, between the top of the leg and the base frame (FIGURE 4).
FIGURE 4
BASE
FRAME
STEP 9
Adjust, if needed.
STEP 10
Fully tighten all legs on base.
24
Serta Motion Essentials™ II Owners Manual 99301408-f
®
BED LINK STRAP KIT (optional)
(1) BED STRAP
LINK INSTALLED
SLOTTED SPACER
inserts between top of
leg and base frame
LEG