Connection
(For MEX-N4150BT)
*1 Not supplied
*2 Speaker impedance: 4 – 8 Ω × 4
*3 RCA pin cord (not supplied)
*4 Depending on the type of car, use an adaptor for a
wired remote control (not supplied).
*5 Whether in use or not, route the microphone input
cord such that it does not interfere with driving
operations. Secure the cord with a clamp, etc., if it is
installed around your feet.
White
White/black striped
Gray
Gray/black striped
Green
Green/black striped
Purple
Purple/black striped
Black
Yellow
Red
Blue/white striped (MAX 0.4A)
*
See "Power connection diagram (Argentine models
only)" (page 33) for details.
*
6
For Argentine models
2
*6 AUDIO OUT can be switched to SUB or REAR.
*7 Note for the antenna (aerial) connecting (Argentine
models only):
If your car antenna (aerial) is an ISO (International
Organization for Standardization) type, use the
supplied adaptor to connect it.
*
3
*
3
Power amplifier*
from a wired remote control
(not supplied)*
4
Front speaker*
Rear speaker*
For details, see "Making
connections" (page 32).
Microphone
XA-MC10*
from a car antenna (aerial)*
Subwoofer*
1
1
1
*
2
1
*
2
1
*
5
7
31
GB