Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Removing the protection collar and the
bracket
Before installing the unit, remove the protection
collar and the bracket from the unit.
1
Pinch both edges of the protection collar
, then pull it out.
2
Insert both release keys until they
click, and pull down the bracket , then
pull up the unit to separate.
Face the hook inwards.
Mounting the unit in the dashboard
Before installing, make sure the catches on both
sides of the bracket are bent inwards 2 mm (
in). When mounting in a Japanese car, see
"Mounting the unit in a Japanese car" (page 34).
1
Position the bracket inside the
dashboard, then bend the claws outward
for a tight fit.
34
GB
182 mm (7
1
/
53 mm (2
1
/
in)
8
Catch
2
Mount the unit onto the bracket , then
attach the protection collar .
Notes
If the catches are straight or bent outwards, the unit
will not be installed securely and may spring out.
Make sure the 4 catches on the protection collar
are properly engaged in the slots of the unit.
Mounting the unit in a Japanese car
You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult your
Sony dealer.
TOYOTA
Bracket
Existing parts supplied with
3
/
32
your car
NISSAN
in)
4
Bracket
Existing parts supplied with
your car
to dashboard/center console
Bracket
to dashboard/center console
Bracket
Publicidad
