Publicidad
ENGLISH
screws into the 4 holes on the perimeter of the frame.
Electrical connections
Ovens equipped with a three-pole power cable are designed to operate on alternating
current. The cable for the grounding of the device is yellow green
Mounting the power cable
- Opening the terminal box (Fig. 5):
- Using a screwdriver, prise the bolt on the side tabs of the terminal box cover.
- Unscrew the screw and open the cover.
- To install the cable, proceed as follows:
- Remove the cable clamp screw and the three contact screws.
- Fix the wires under the screw heads using the following colour scheme:
- Blue - Neutral (N)
- Brown phase connector (L)
- Yellow-Green (Ground)
- Secure the power cable with the cable clamp and close the terminal box cover.
Connecting the power cable to the mains
- Install a standard plug (not included) corresponding to the load indicated on the
rating plate. When connecting the cable directly to the mains, install an omnipolar
circuit breaker with a minimum contact opening of 3 mm between the device and
the mains. The omnipolar circuit breaker must be sized according to the load and
comply with the applicable regulations (the earth cable must not be interrupted by
the circuit breaker).
- The power supply cable must be routed so that it does not reach a temperature
above 50 oC above ambient temperature and must be protected by insulation with
an appropriate rating.
- Before making the connection, check that:
- The electrical safety of this appliance can only be guaranteed if the oven is
correctly and effectively earthed in accordance with electrical safety regulations.
Always make sure that the ground connection is effective; if in doubt, call a qualified
technician to check the system. EVVO declines all liability for damage resulting from
a system that has not been grounded.
- Before connecting the appliance to the mains, check that the specifications
indicated on the rating plate (on the appliance and/or on the packaging) correspond
to those of the mains supply at home.
- Check that the electrical capacity of the installation and the sockets can withstand
the maximum power of the appliance. If in doubt, contact a qualified technician.
- If the socket and plug of the appliance are not compatible, ask a qualified technician
to replace the socket with a suitable model. The latter, in particular, will also have to
40
HORNO INTEGRABLE EVVO H25 INOX / BLACK / WHITE
Publicidad
