2.10
-- Using the control
The control is installed in simple systems with direct heating circuits.
Note
After connecting an outdoor sensor, the control operates based on the weather.
2.11 Operating and display functions
Note
The functions described in this section are not available for all system configura-
tions.
The product has two adjustment and display levels.
The end user level contains information and setting options that you require as the end
user.
-- The installer level is reserved for the competent person. It is protected by a code.
Only competent persons may change any settings in the installer level.
To call up the menu, press
2.11.1 CONTROL menu item
MENU → CONTROL
→ Zone
→ Mode:
0020323648_01 Operating and installation instructions
VRT 380f
eBUS
twice.
→ Manual
Uninterrupted retention of the desired temperature
→ Time-contr.
→ Desired temperature: °C
→ Weekly planner
→ Set-back temperature: °C
9