Descargar Imprimir esta página

Motorola Solutions IMPRES NNTN8845 Guia Del Usuario página 20

Ocultar thumbs Ver también para IMPRES NNTN8845:

Publicidad

MN002406A01-AL
Chapter 2 : Troubleshooting
Chapter 2
Troubleshooting
The IMPRES adaptive charger has the following features:
A universal input power supply
A constant current rapid charger
A negative pulse conditioning charger
A reconditioning unit
A 2-USB Type A power outputs
A user selectable on/off switch for turning recondition on or off
The combination of the features listed above are unique in a desktop charger. Therefore, operation of
the radio with a battery attached while in the charger is not recommended.
During the charging process, radio operation can result in minimally reduced radio performance and
extended battery charge time.
During the reconditioning process, the battery becomes fully discharged. As a result, the radio can
shut down during reconditioning mode. Motorola Solutions recommends that you calibrate the battery
without radio attached. Otherwise, turn off the attached radio.
When troubleshooting, always observe the color of the LED.
Table 3: Troubleshooting
Problem
No charger indication
Blinking red indication
Blinking amber indi-
cation
20
What it Means...
Charger contact is not be-
ing made.
No power to the charger.
Charger contact is not be-
ing made.
Battery is not chargeable.
Battery is waiting to charge.
The battery temperature can
be below 5°C (41°F) or above
What to do...
Check that the radio with battery, or
the battery alone, is inserted correctly.
Make sure that the power cord is se-
curely plugged into the charger and an
appropriate AC outlet, and that there is
power to the outlet.
Remove the battery from the charger
and replace it back into the charger.
Verify that the battery is a Motoro-
la Solutions-authorized battery list-
ed in
Motorola Solutions-Authorized
APX
Batteries. Other batteries may
not charge.
Remove power from the battery
charger and, using a clean dry
cloth, clean the gold metal charging
contacts of both the battery and the
charger.
Replace battery.
When this condition is corrected, the
battery starts charging automatically.

Publicidad

loading

Este manual también es adecuado para:

Impres nntn9178