Product Overview - Beckman Coulter HIAC 9703+ Manual Del Usuario

1. The equipment may not cause harmful interference.
2. The equipment must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications to this equipment not expressly approved by
the party responsible for compliance could void the user's authority to
operate the equipment. This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case the user will be
required to correct the interference at their expense. The following
techniques can be used to reduce interference problems:
1. Disconnect the equipment from its power source to verify that it is or
is not the source of the interference.
2. If the equipment is connected to the same outlet as the device
experiencing interference, connect the equipment to a different
outlet.
3. Move the equipment away from the device receiving the interference.
4. Reposition the receiving antenna for the device receiving the
interference.
5. Try combinations of the above.

Product overview

The HIAC 9703+ liquid particle counter system measures particles in a
variety of liquids with a syringe sampler and sensor. The instrument
must connect to a computer for operation and data management. Refer
to Figure 1 and Figure 2.
An external sensor is used with the HIAC 9703+ liquid particle counter
system. Refer to Figure 1, item 2. The external sensors are classified as
Class 1 Laser Products. Refer to the sensor manual for FDA and IEC
compliance.
Figure 1 HIAC 9703+ liquid particle counter
1 Syringe
2 Sensor
3 Sample probe
4 Sample target
5 Docking module
6 Front panel
English 5