Descargar Imprimir esta página

Kärcher G 3050 OHC Manual Del Usuario página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

Detergents can only be applied with the black
detergent nozzle.
STEP 1:
Install the black detergent nozzle for deter-
gent application at low pressure.
STEP 2:
Fill a container with Kärcher detergent.Place
the fi lter end of detergent suction tube into the
container.
CAUTION
This unit has been designed for use with cleaning
detergents recommended by the manufacturer.
The use of other cleaning detergent may affect the
operation of the machine and void the warranty.
Always Use Kärcher Detergent for Best Results
Kärcher biodegradable detergents are specially
formulated to protect the environment and your
pressure washer. The special formula won`t clog
the suction tube fi lter and will protect the internal
parts of the pressure washer for a longer life. For
Kärcher Detergents, check your retailer or visit
our website:
www.karcherresidential.com
STEP 1:
Move the engine stop switch to the OFF position.
For engine details see engine manual.
WORKING WITH DETERGENTS
Detergents
TAKING A BREAK ...fi ve minutes or more
STEP 3:
With the engine running, pull trigger to operate
unit.
Liquid detergent is drawn into the unit and
mixed with water.
Apply detergent to work area.
Do not allow detergent to dry on surface.
STEP 4:
Always draw fresh water through the deter-
gent suction tube when the cleaning job is
done, to rinse/fl ush any remaining detergents
from the injection system.
For best results see Cleaning Tips for specifi c
information on how to clean different surfaces.
CAUTION
Never use:
Bleach, chlorine products or other corrosive
chemicals
Liquids containing solvents (i.e., paint thin-
ners, gasoline, oils.)
Tri-sodium phosphate products
Ammonia products
Acid-based products
These chemicals will harm the unit and will damage
the surface being cleaned.
Use of these items will void the warranty.
STEP 2:
Release trigger and engage safety lock.
English 9

Publicidad

loading