cecotec Conga Thunderbrush 670 Manual De Instrucciones página 21

3-in-1 accessory: this accessory is designed to clean small rooms, cracks or irregular surfaces
such as corners, window frames, drawers, picture frames, keyboards etc.
3. PRODUCT ASSEMBLY
1. Aluminium suction tube
• Introduce the aluminium tube's end in the dust tank in a horizontal position. Make sure a
"click" sound is heard, indicating it is properly fixed..
• To remove the aluminium suction tube from the dust tank, hold the dust tank with one
hand while you press the release button and with the other hand pull the suction tube out.
2. Suction base
• Introduce the suction base into the aluminium suction tube's end and make sure it is se-
curely fixed. Make sure a "click" sound is heard, indicating it is properly fixed
• To remove the suction base from the aluminium suction tube, hold the suction base with
one hand and with the other hand pull the aspiration base out
05124_ThunderBrush 670 Inmortal Battery 22,2 V_Manual_MV.indd 21
CONGA THUNDERBRUSH 670 IMMORTAL BATTERY 22,2 V
ENGLISH
21
13/12/18 17:46