Measurement Procedure - Walgreens PREMIUM ARM Manual De Instrucciones

MEASUREMENT PROCEDURE

Important Notes:
• Blood pressure changes with every heartbeat and is in constant
fluctuation throughout the day.
• Blood pressure measurement can be affected by the position
of the user, his or her physiologic condition and other factors.
Before Measurement:
To help ensure an accurate reading, follow these instructions
before taking a measurement:
• Wait 1 hour after exercising, bathing, eating, drinking
beverages with alcohol or caffeine, or smoking to measure
blood pressure.
• Sit quietly and rest for 15 minutes.
• Stress raises blood pressure. Avoid taking measurments
during stressful times.
• Take your reading in a comfortable enviroment as
measurements can be affected by hot or cold temperatures.
Take your blood pressure at normal body temperature.
During Measurement:
• Do not talk or move your arm or hand muscles.
• Do not cross your legs. Sit with feet flat on the floor.
• Do not touch cuff or monitor during measurement.
If you are using this blood pressure monitor for the first
time, please remove the protective film from the screen.
21
Using Single Measurement Mode:
1. Please make sure the Triple-Check switch, located on the
back of the unit, is in the OFF position.
2. Press the USER-SELECT button to choose User 1 or User 2.
M
After the user number is selected, press the START/STOP
button to confirm the chosen user.
3. With the cuff wrapped around your arm, press the START/
STOP button. Do not inflate the cuff unless it is wrapped
around your arm. All digits will light up to check the display
functions. The checking procedure will be completed after
about 3 seconds.
START
STOP
Note:
If the Rest Assure Function is ON, the 5 minute countdown will
begin after the checking procedure is complete.
22