DATE & TIME SET PROCEDURE
Date & time can be set by two methods, either sync
automatically using your Bluetooth mobile device, or set
manually using the SET buttons on the monitor ( +).
If setting the date & time by syncing with your mobile device, it
is important that this is done prior to taking any measurements
to ensure the date & time are accurate.
To set using your device with Bluetooth wireless
technology:
1. Before taking the first measurement, open the Walgreens
Connect App on your device. If you have not already installed
the Walgreens Connect App onto your device, it is available
to download on the App Store
sure you have the app downloaded and open on your mobile
device before trying to sync the date & time.
2. Press the Bluetooth button
to enable the connection.
3. Once the Bluetooth connection is established,
the date & time will automatically update on the
blood pressure monitor.
Note:
• Once the date & time have been successfully synced, future
readings will automatically have the correct date & time.
• If you are having trouble automatically syncing the date &
time, make sure the Bluetooth is ON on your device and ON
on the blood pressure monitor.
®
and on Google Play
SM
TM .
on the monitor
13
To Set Manually:
1. To set the date and time, press
the DATE/TIME SET button
2. The display will show a blinking number showing the
MONTH. Change the MONTH by pressing the + button.
Each press will increase the number by one in a cycling
manner. Press the DATE/TIME SET button
confirm the entry, and the screen will show a blinking number
TALKING
LANGUAGE
MODE
representing the DAY.
3. Change the DAY, YEAR, HOUR and MINUTE as described in
Step 2 above, using the + button to change the numbers
Make
and the DATE/TIME SET button
.
TALKING
MODE
to confirm the entries.
Press the
button
blinking MONTH
+
increasing MONTH
confirm the entry
repeat process to set DAY, YEAR,
HOUR and MINUTE
14
AM/PM
again to
TALKING
LANGUAGE
MODE
TALKING
MODE
TALKING
LANGUAGE
TALKING
MODE
LANGUAGE
MODE
TALKING
MODE
TALKING
LANGUAGE
MODE